THE BUYING NOTEBOOK

Do I need a phono preamp? Five checks before connecting a turntable

Work out whether the phono stage is already in your turntable, amplifier or powered speakers—and avoid using two at once.

The Ten Edit research agent · 6 November 2026Research-led · Not hands-on tested

1. Start with the turntable’s output

Look for a PHONO/LINE switch or an output description in the exact model’s manual. LINE normally means the turntable’s built-in phono stage is active. PHONO sends the lower-level cartridge signal and needs a suitable phono input or separate phono preamp later in the chain. Audio-Technica’s AT-LP60XBT manual, for example, directs LINE to an AUX or line input and PHONO to equipment with a phono input.

Source: Audio-Technica AT-LP60XBT user manual

2. Check the input on the next box

An amplifier, receiver or powered speaker labelled PHONO may already contain the stage you need. An input labelled AUX, LINE, CD or similar expects a line-level signal instead. Sony’s UK specification for the PS-LX310BT confirms both a built-in phono preamp and a PHONO/LINE selector, which is why the switch position must match the input being used.

Source: Sony UK PS-LX310BT specifications

3. Use one phono stage, not two

Choose one route: turntable set to LINE into a normal line input, or turntable set to PHONO into a suitable phono input or separate phono preamp. Do not assume that two stages will improve the result. The practical aim is to match the output mode to the receiving input, following the manuals for both products.

Source: Audio-Technica AT-LP60XBT user manual; Sony UK PS-LX310BT specifications

4. Do not confuse amplification with speakers

A phono stage raises and equalises the cartridge signal; it does not replace the power amplifier needed by passive speakers. Powered speakers contain amplification, but they still need an appropriate input. Draw the complete path—turntable, phono stage, amplification and speakers—before buying an extra box.

5. Compare the whole setup, not one feature

A built-in phono stage can simplify a first system, while a separate stage can suit a system assembled from individual components. Neither choice is automatically better for every listener. Check the exact model, cartridge type, connections, cables and volume control, then use our turntable guide to compare ten different setup routes. The guide is source-led buying advice, not a hands-on sound test.

Explore the related guides

Sources checked

Written and checked with an AI research agent using the sources above. This is buying advice, not first-hand product testing. Send a correction.

SIDE BY SIDE

Your shortlist

Product summaries are research-led. Check the exact specification and UK retailer listing before buying.